WTS Spyderco Shaman w/ skinny scales
 

Spyderco Shaman S30v w/ Skinny scales $168

Spyderco Shaman stonewash S30v with Flytanium black G10 skinny scales, stonewash titanium deep carry clip and titanium backspacer.  Comes with original parts- black G10 scales, clip, and backspacer.  Great action and feel.  It has been nicely sharpened by previous owner. 2nd owner, lightly carried.

 
Yolo takes priority. Please comment before PMs. Chats without comment below may be ignored. Prompt payment appreciated. I will send out via USPS Priority mail flat rate small box, tracked & insured.

Timestamp: https://imgur.com/a/lMAXtzG

1 Quiet Carry Drift L (KNSWSW) - Vanax , stonewashed blade, titanium scales , at least 2nd owner , clean , with good action and centering, original sharp edge . Comes with box and warranty card

S/V 255$ SOLD

2 Renegade Provisions Gungnir , M390 Satin blade , Ti/Black Micarta Scales Batch 1 88/300 , at least 2nd owner , clean , with good action and centering, original sharp edge . Comes with case , COA, Extra hardware

S/V 189$

3 Olamic Wayfarer 247 Funky Holes M390 Acidwashed blade , the blade has some scuffs shown in the video. Modded by Ted RCO Customs ( Mods anodized Scales and Hardware ) https://www.instagram.com/reel/C2FrlIkOtWl/?xtok=YjY3NmIzOXBldHBi , 2nd owner, typical Olamic strong detent , good action and centering , the edge looks original and sharp . Comes with pouch , pivot tool and COA

S/V 275$

4 OZ Little John pen , 2nd owner , overall good condition, used and carried.

S/V 85$ SOLD

No Trades atm , PayPal FF or Zelle , will ship tomorrow via USPS or UPS. Thank you 🙏

#1 Brand/ model: Benchmade Shoot Out (5370GY-06)

Price (SV): $150 CONTUS (PP F&F)

Photos: [Time Stamp] [Pics] [Video]

Edge Condition: factory

Ownership: 1st

Body Condition: no physical blems

Box and Papers: included

Modifications: none

Disassembled: no

Blade steel: CruWear

Handle Material: Grivory

Locking Mechanism: OTF

Country of Manufacture: USA

______________________________________________________________________

#2 Brand/ model: Benchmade Bug Out (GovX exclusive) 535BK-GOVX1

Price (SV): $300 CONTUS (PP F&F)

Photos: [Time Stamp] [Pics] [Video]

Edge Condition: factory

Ownership: 1st

Centering/Lock up: Centered, solid lock-up

Body Condition: no physical blems

Box and Papers: included, all original parts

Modifications: Gersch Reblade

Disassembled: yes

Blade steel: Bakers Forge Copper Dimascus

Handle Material: carbon fiber

Locking Mechanism: axis lock

Country of Manufacture: USA

______________________________________________________________________

#3 Brand/ model: MKM Miura

Price (SV): $200 CONTUS (PP F&F)

Photos: [Time Stamp] [Pics] [Video]

Edge Condition: sharpened to 18 degrees

Ownership: 1st

Centering/Lock up: Centered, solid lock-up

Body Condition: no physical blems

Box and Papers: included + tool & OG bearings

Modifications: skiffs

Disassembled: yes

Blade steel: M390

Handle Material: Titanium, integral

Locking Mechanism: Button (plunge) lock

Country of Manufacture: Italy

______________________________________________________________________

#4 Brand/ model: Benchmade Mini Griptillian

Price (SV): $200 CONTUS (PP F&F)

Photos: [Time Stamp] [Pics] [Video]

Edge Condition: factory

Ownership: 1st

Centering/Lock up: Centered, solid lock-up

Body Condition: no physical blems

Box and Papers: no box, all original parts included

Modifications: Gersch reblade, flytanium scales

Disassembled: yes

Blade steel: Bakers Forge Copper Damascus

Handle Material: aluminum

Locking Mechanism: axis lock

Country of Manufacture: USA

______________________________________________________________________

#5 Brand/ model: WE Knives Bougie Banter

Price (SV): $200 CONTUS (PP F&F)

Photos: [Time Stamp] [Pics] [Video]

Edge Condition: sharpened to 18 degrees

Ownership: 1st

Centering/Lock up: Centered, solid lock-up

Body Condition: no physical blems

Box and Papers: included

Modifications: skiffs

Disassembled: yes

Blade steel: S45VN

Handle Material: titanium

Locking Mechanism: crossbar lock

Country of Manufacture: China

Zero Tolerance 20th Anniversary release! ZT 0020 w/ the USA made Vegas Forge Damascus.

780 shipped to continental US of A

Beautiful piece. Action is superb, centering is perfect.

Catch and release! I bought it brand new from Zero Tolerance website on release day.

Comes with all original accessories, presentation box, storage pouch, and numbered Certificate of Authenticity.

Never cut! Never carried!

Price indicates just getting back what I paid and seller paid shipping. Not looking to capitalize.

Thank you for looking!

Hey everyone. Today I’m selling a crosshatch rosie in ti and s45vn. I am the second owner. It’s pretty much a catch and release for me. I’ve had it maybe a week. It hasn’t seen much pocket time at all or use. I have not modded it or taken it apart. I have not sharpened it either. It comes with everything. the coa, stickers, and a pouch. Everything on it is pretty much in great condition. The lockup is great and I don’t see any issues with it. If you notice something that I didn’t see feel free to correct me.

SV 815
TV 815

Am open to hearing trade offers but I’d prefer them to include some cash with the trade knife.

Will ship asap. More than likely tomorrow unless bought soon enough today.

I can only take Venmo. My PayPal does not work and neither does the feature to send money from your PayPal to my Venmo.

YOLO is priority. Please be prepared to pay within 2 hours of yolo.

Another case cleanout batch. All prices include shipping through USPS with tracking. Prefer to sell but will look at trade offers; mostly interested in CRKs. Chat with any questions or offers. YOLO trumps chat.

Timestamp

https://imgur.com/a/wnponOF

SOLD Benchmade Mini Bugout SV 95 SOLD

https://imgur.com/a/fbMf9g5

S30V, first owner. Sampled a bunch at REI and got the smoothest one with the most solid lockup of the bunch. Carried, and I think I cut a thread off of a t-shirt. Comes with box and docs. Centering is solid and it’s the only Benchmade Axis Lock I’ve ever owned without blade play (but maybe that’s just me).

Peña Mula SV 295

https://imgur.com/a/r4xTj6w

Hand-rubbed M390 with Mokuti clip, backspacer, thumb studs, and pivot collars. Titanium scales. Think I’m the third owner, never cut or carried by me but not sure about previous. Comes with box. Cranes Cutlery exclusive. Centering is on the money and I’d say lockup is about 30%. No play.

Spyderco Bodacious SV 225

https://imgur.com/a/nuJsu03

S90V and carbon fiber. Sprint run. First owner. Disassembled once when I received it. Carried it to work (in the office, not the field) once but never cut. Comes with box and docs. Centering is bang-on and lockup is around 30% if I had to estimate. Has the typical minute Spyderco side-to-side play to be drop-shutty, but that can be adjusted.

Tempest Fractus SV 205

https://imgur.com/a/VsMmFAr

S90V, micromilled titanium, and FatCarbon inlays. Nice and snappy. Second owner. Previous cut and carried (and sharpened once I think). No cut or carry by me. Comes in a pouch. Centering is spot on and lockup is about 50%. No play.

Ferromonster Ferrox SV 185

https://imgur.com/a/L4G2Mhl

Hand-rubbed M390, FatCarbon Dark Matter show scale, titanium frame lock. Not sure of ownership or use, but no outward signs of use. Comes with box. Centering is solid and lockup is about 15-20%. No play.

Artisan Small Arion SV 150

https://imgur.com/a/02g5lxG

S35VN and micromilled titanium. Second owner, no cut or carry from either of us. Comes with pouch and COA. Long-sold-out WMK exclusive. Lockup is probably 35% with no play. Centering is a hair to the show side. Super snappy.

SOLD Divo Fireball SV 180 SOLD

https://imgur.com/a/XCGZzCH

Polished DLC S90V, FatCarbon (Purple Haze), with titanium backstrap/backspacer. Snappy as hell, very utilitarian blade shape with the slight belly and bevel at the toe of the blade for your finger for draw cuts. Comes with box. Centering is solid, lockup is 20%. No play.

For sale: Schwarz Enduro

Video: https://imgur.com/a/Lqd6SJj

Comes with: everything it comes with new (baggie, box, sticker, COA)

Edge condition: factory and unused

Ownership history: first owner

Condition: Like new/new

Blade: Magnacut

Scales: Rosedale Richlite (textured)

Centering: perfectly centered

Price: $285

Trades: None

Timestamp:

Videos

🔪 Renegade Provisions Gungnir , M390 Satin blade , Ti/Black Micarta Scales Batch 1 88/300 , at least 2nd owner , clean , with good action and centering, original sharp edge . Comes with case , COA, Extra hardware

S/V 189$ 169$

🔪 Olamic Wayfarer 247 Funky Holes M390 Acidwashed blade , the blade has some scuffs shown in the video. Modded by Ted RCO Customs ( Mods anodized Scales and Hardware ) https://www.instagram.com/reel/C2FrlIkOtWl/?xtok=YjY3NmIzOXBldHBi , 2nd owner, typical Olamic strong detent , good action and centering , the edge looks original and sharp . Comes with pouch , pivot tool and COA

S/V 275$ 250$

No trades ATM, PayPal FF or Zelle , will ship tomorrow via UPS or USPS , Thank you 🙏

Catch and release. Paypal F/F, shipping wherever in the US I suppose, open to trades but I mainly want money because I'm a needy brat. This knife is so cool I decided to write the timestamp with my blood. Just kidding, that's unsanitary or whatever the mods said. Something about bodily fluids being reserved for certain subreddits, whatever that means.

Overland X Magnacut Blue g10

Take er for ...207... Third owner at least, sharpened, cut, and carried, no modding, no dissassembly. Edge is sharp. Knife is in great condition with pristine looking scales and minor scratches on blade. TJ gets that heat treat right, so this blade is gonna be a performer! I bought it because I was curious, but I'll stick to my drop point blades like the good little boy I am. Comes with box, COA, and rag that has no blood on it.

By the way, does anyone know how to remove a cyllinder that measures 8 inches by 0.879 inches in diameter from a Spyderco Paysan bladehole? The cylinder is rather hard but got squished into the hole somehow! It's imperative that the cylinder remains unharmed.

If you have a titanium phresh original goat backspacer or phresh original goat gunstock clip, boy oh boy please message me.

Hi Ks.

##PM 2 s35VN satin.

BNIB. Centered. Snappy action and solid Spyderco lock up. Can use some pivot tuning like most new Spyderco. Box and doc

$$165

##PM2 s30V DLC jboutdoors exclusive

BNIB. Centered. Snappy action and solid Spyderco lock up. Can use some pivot tuning like most new Spyderco. Box and doc

$$160

##PM2 cruwear / crucarta

BNIB. Centered. Snappy action and solid Spyderco lock up. Can use some pivot tuning like most new Spyderco. Box and doc

$$160

##Autmog 38 clipless Ti // bronze mech.
OHTO refill
Full kit from Autmog.

Brand new. Few clicks to try to mech.

$$245

Shipping con US.
Payments made in PPFF, no notes please.
No trades. YOLO over chat.

Thanks!

Hi Swappers,
Another collection reduction posting. Thanks to all of you who purchased knives from my last posting.

• Yolo takes priority over private message discussions.
• If you require more information than what is listed, please feel free to ask.  
• Reasonable offers are definitely welcome (however, ridiculous offers will be politely ignored).
• I will offer additional price reductions for any purchase of multiple knives from this list.
• All sales/trades are final
• By purchasing a knife from me, you are stating you are of legal age to purchase & possess the item(s) & that the particular type(s) are legal to own in your locality.
• Knives usually ship out the next business day. USA Shipping Only
• Payment through Venmo or Zelle only; No notes
• No trades at this time

Thanks and good luck!
Jeff G.

—---------------------------------------------------------------------------------------------------------------------------

Date Verification:  https://imgur.com/a/2JutQPL

(1) Null Knives - Voodoo (Black Camo Carbon scales) + Null Knives Sentry Pouch 2.0 (navy blue)

• Images: https://imgur.com/a/MV33Z0m
• Description: Bolsterlock folder; 3.6” deep hollow ground M390 sheepfoot blade with hand-rubbed satin finish; glass-blasted contoured titanium handles with black camo carbon fiber inlays; glass-blasted titanium backspacer and pocket clip (right hand, tip up); Caged ceramic ball bearings and ceramic detent ball; black DLC thumstuds and pivot. [Serial No.: 647]
• Condition: BNIB
• Ownership: 1st owner. Purchased directly from Null Knives
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with box, COA, stickers, and Null Knives Sentry pouch 2.0 (navy blue)
• Price: $450

(2) Mechforce - M1

• Images: https://imgur.com/a/GxcRyQ1
• Description: 3.5” M390 drop point blade with flat grind and dual tone finish (stonewashed, brushed); 4.7” titanium frame with phantom blue anodized “fragtanium” inlay. Titanium frame lock with a steel lockbar insert. Can be opened with the jimped flipper tab or thumb slot and has a ball-bearing pivot assembly and a titanium deep carry pocket clip. It also has a very cool hidden lanyard post. Its unique hidden hardware design creates one of the cleanest knife designs on the market. [Serial No.: 35]
• Condition: LNIB
• Ownership: 2nd owner. New condition (never cut, carried, sharpened, or disassembled by the original owner or me), but since it has had two owners, I’m listing it as LNIB
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play
• Notes: Comes with all original packaging, including metal COA card, documents, replacement adhesive for inlays.
• Price: $200

(3) EMPEDC - Bowie PULSE OTF 

• Images: https://imgur.com/a/R3U3mcs
• Description: 3.2” Bowie Magnacut blade (63-64 HRC); 4.4” milled T6-606 aluminum handle with “magic wave milling; 7.6” overall length, 3.6 oz overall weight. Titanium thumb slide. Zircuti clip
• Condition: BNIB
• Ownership: 1st owner. Purchased directly from EMPEDC, 2nd run.
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and almost no blade play (one of the best I’ve experienced other than Hawk’s Desdlock and some of the new higher-end Microtechs
• Notes: Comes with box, soft zipper case, COA card, and stickers. Zircuti clip ($99) and knife were purchased from EMPEDC together ($380 all in); original titanium clip included
• Price: $250

(4) Monterey Bay Knives - EZC (Button Lock Front Flipper)

• Images: https://imgur.com/a/2QuEklv
• Description: designed by Ray Laconico, 3” satin-finished 20CV drop point blade with notched front flipper. 3.75” bead-blasted titanium handle with matching backspacer and tip-up clip; 6.75
• Condition: BNIB
• Ownership: 1st owner. Purchased directly from MBK
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with original branded black soft zipper pouch, branded cleaning cloth, and a full set of extra hardware (screws, bearings, button, spring, washers… everything)
• Price: $185

(5) CRKT - Provoke EDC

• Images: https://imgur.com/a/crkt-provoke-edc-Q1jgAQ3
• Description: 2.56" satin-finish D2 drop point blade, blue aluminum handle, Kinematic deployment, 
• Condition: BNIB
• Ownership: 1st owner. Purchased directly from CRKT
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with box and manual
• Price: $100

(6) Vosteed - Valkyrie

• Images: https://imgur.com/a/PVIkH1W
• Description: 3.26 satin Seax-shaped Nitro-V blade with flat grind; 4.36” gray G10 handle (7.62” overall length); utilizes Vosteed’s Trek lock, which is a button-actuated plunge-lock variant. This versatile knife can also be opened with a front flipper, back flipper and thumb studs. 
• Condition: LNIB
• Ownership: 1st owner. Purchased directly from Vosteed.
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: This model is now discontinued and hard to find. Comes with an aluminum container, two patches and a cleaning cloth. New condition, not a mark anywhere, but I have flipped it a few times.
• Price: $80

(7) Kizer - Microbe

• Images: https://imgur.com/a/DPEvS1U
• Description: 2.19" 14C28N gray stonewashed drop point blade with an excellent finger choil; 3.14” blue anodized aluminum handle that is designed with a micro-arc curve that fits the hand comfortably; Kizer button liner lock opening with thumb hole.
• Condition: BNIB
• Ownership: 1st owner. Purchased directly from Kizer
• Carried/Cut/Disassembled: No
• Edge: Factory edge, never sharpened.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with box, paperwork, stickers and extra hardware.
• Price: $45

(8) EMP EDC - MoKuTi Kit for Nymble T2

• Images: https://imgur.com/a/aFgumfb
• Description: Full hardware set for the EMPEDC Nymble T2. This distinct reddish/crimson hue is discontinued and is very tough to find compared to the typical blue/purple runs. Includes: Pocket Clip, Backspacer, Pivot, Dual Pivot Collars, Titanium Screws
• Condition: New, never installed
• Ownership: 1st owner. Purchased directly from EMPEDC
• Notes: Purchased from EMPEDC but never installed on my Nymble T2; I believe these will fit on other models but not 100% certain which ones.
• Price: $90

Looking to move these three onto their next lucky owner. All are excellent, just not seeing the use or carry they deserve. 

Timestamp

HMC Transient Frame Lock

Original owner. This one has been used and carried. There are marks most prominent on the clip as evidence. This one had some odd blade play, so it went back to Jim where he modified the tip and fixed it to be perfect. Featuring a blackened ti lock side and red richlite show side. This is a great user/carry knife. It does tend to favor the show side a bit. Slid lockup. Will come with pouch, brand new unopened Hellion pivots and COA.

Asking $875 

JG Scout 

2019 build in full Ti. This is a peak Scout framelock.  This one has perfect smooth action on Teflon washers and what I consider to be the perfect detent. Another one I can’t confirm the chain of ownership on, but it appears to be in good condition with very few signs of use or carry. Excellent centering and solid lockup. Ships with soft taco and COA. 

Asking $850

Benchmade Bugout 535BK-4

Aluminum Bugout in M390. This one has been blacked out to include a rockscale design geared backspacer and black thumbstud. I am at least the second owner. No significant signs of use or carry here either. Dead centered, and locks up solid. Excellent action comes with original box and pouch. 

Asking $180

All prices include U.S. Shipping. I can ship USPS or UPS buyer’s preference. I am also willing to ship international but the buyer would cover any costs over standard shipping rates. 

Not looking for any trades at the moment, but I am open to reasonable offers if my pricing seems off. 

As always if you have any questions or need more info, just ask! 

Timestamp - https://imgur.com/a/Uqr6L0D

Just thinning the herd a bit. Not against trades but mostly looking to sell.

Jarosz Kali - SG2 blade, purple G10 scales, red G10 backspacer. The scales on this are not original, they were swapped by a previous owner, so there are some very minor fitment issues. Smooth as heck on teflon washers, nice snappy detent. Overall a great knife, I just don’t carry locking knives much. Centered and solid lockup. There are some surface marks on the blade from cutting due to the blasted finish, but they're very minor. Pics/Vid - https://imgur.com/a/eCPoo66 $650

Don Southard Lockback Saddlehorn - O1 blade, jigged rosewood covers, 3.75” closed. This one has a wicked grind as all of Don’s knives do. There’s a speckle on the blade on the show side and some pepper spots on the back spring. Really nice knife, just a bit small for me in this pattern. A touch of wiggle side to side on when open which isn't uncommon of lockback traditional knives. Pics/Vid - https://imgur.com/a/5rRPdxV $600

Chrisman Cali Trapper - W2 blade w/ hamon, vintage rag micarta covers, 4” closed, includes COA and slip. I’m the second owner. This is a wicked little knife with a nice rounded spine on the blade. It is sometimes slightly off center in closed, but not always. Pics/Vid https://imgur.com/a/chrisman-cali-trapper-k5DZdk9
$450

Happy to take any other pics or send videos or answer questions.

https://imgur.com/a/wJKzoxg

Want to sell this guy as it doesn’t get the use I thought it would. I’m also starting to get into guns…

Purchased new by me three years ago at SMKW. Carbon fiber/M390.

Carried approximately 8 hours total and cut approximately 4-6 catfish gills along with maybe the tape of one singular box. Factory edge, still good and sharp. There are two small glints of the right light in the edge toward the tip, I tried to capture them in the video.

I can’t find any scratches or wear. No mods.

Comes with Armatus Architect kydex sheath. Snaps in and out perfectly. Comes with stock leather sheath, box, and all factory contents. After I took the pics I also found the Armatus ziplock bag and two Armatus stickers.

Pics and video:
https://imgur.com/a/Ji8qJpM

SV160 shipped asap via USPS unless we discuss otherwise. PayPal F+F only with no notes please. No trades.

Hello, I take Paypal FF, venmo FF, cashapp, or zelle.

No trades please thanks. 2nd owner on these, and Will ship USPS fully insured, thanks!

Cheburkov Kori limited run of 100, M390:
This one is close to new, it wasn’t carried by me or used, the previous (original owner) said the same that it was NIB however there’s clearly a snail on the showside titanium scale, as shown in the video, don’t see any other wear. Probably from handling or placing it onto something. Also centered and solid, really nice. Comes with box and COA.
-825 shipped
Vid: https://imgur.com/a/jPeGZq5
Box: https://imgur.com/a/QnZLFeE

Modded Large Sebenza 21 Black Micarta, S35VN:
So this has been done up, mods were done by Yehonatan Izhak (https://www.instagram.com/jonaz_creationz/), where a regrind, dlc coating, and white cerakote were added. The regrind is very well done and so is the edge. The cerakote is a little splotchy and same with the DLC, please observe the videos. It was not carried, used, or cut with. Centered and solid lockup, don’t have the box but I’ll ship it in a nice spare knife pouch.
-650 shipped
Vid: https://imgur.com/a/7H5qghj

SHF Full Size Folder, S45VN Blade Stonewash:
This was one of their batches where they misprinted S35VN, so there’s an asterisks near the steel, it’s S45VN kind of cool, depending how you look at it lol. In terms of condition it’s in very good shape, don’t even think it was pocketed. Not used to cut either, thing of note is the action is very smooth except for when the detent ball passes the ramp on the blade, it’s a bit gritty for that slight portion. Other than that it’s nice, centering favors showside a bit, but is smooth and solid lock up. And comes with original box
-350 shipped
Vid: https://imgur.com/a/551ogA0

Chaves 229 Modded:
-Sexy mods on this Chaves 229, had windows added to the G10 show side and colored accents were added on the hardware and black on the frame. Looks really nice and is butter. Centered, and solid lock. Excellent condition, just a couple snails on blade flats. Was not cut, carried, or used, comes with original box.
-295 shipped
Vid: https://imgur.com/a/7u9ZYdH
Box: https://imgur.com/a/BToIEDL

Eklipse Working Finish Harpoon Spanto Regrind by jonaz_creationz on ig, full titanium, CPM20CV:
Really like this one, it has been pocketed with some pocket snails. The hollow regrind is very well done, and the action is dialed in. Centered and solid, comes with triway kit teflon and pb washers, COA, and box.
-495 shipped
Vid: https://imgur.com/a/xZBWUSM
Box: https://imgur.com/a/ENFmFDD

Half Track Harpoon Spanto Battle Black Full titanium, MagnaCut:
Great little blade. It’s in new condition, not carried, used, or cut with. Comes with original box and triway kit etc… Centered and solid.
-540 shipped
Vid: https://imgur.com/a/VMiptI8
Box: https://imgur.com/a/SrGjUjc

Demko Nano Shark Clip Point Full Textured titanium 20CV,
Like new condition with box, not carried used, or cut with. Centered and solid. Thick solid Ti, very nice.
-300 shipped
Vid: https://imgur.com/a/UOeLCKH
Box: https://imgur.com/a/o5ven7E

Modded, Demko Nano Shark Sharks Foot Full Textured titanium 20CV:
Was anodized by crazy creations and he like sanded the peaks of the diamond pattern a bit for contrast, and also gave a cracked iceish finish on the sides and clip. Very cool, this does have some marks towards the tip of the blade as shown in the video. Action is solid and smooth, comes with box.
-290 shipped
Vid:https://imgur.com/a/cch0Km2
Box: https://imgur.com/a/1FIjXr5

Thanks!

Hey guys! Excited to share with you a phenomenal knife from one of my favorite makers of all time: this is a Remi Ultrafort that was just built less than two weeks ago. Mostly just looking for trades right now because I'm always looking to enjoy something new!

timestamp, pics, and vid

This is a Remi Ultrafort with a 3.5" RWL-34 blade with a gorgeous, glowing hand-rubbed satin finish riding on bearings. The liners and clip are titanium, the scales are Copper Space Coral Fatcarbon, and the backspacer is polished stainless. It's a front flipper-only knife with a medium detent, which means it's quite a firm detent by the standards of French knives IMO. The blade rockets with authority and closes with a super satisfying ceramic click. Remi does some of the best actions of any French maker I've owned and the drop on this is absurdly smooth, just the gentlest shake-shut.

This was finished on 10/13/2026 and has been in my possession for about a week. It is utterly pristine: never cut with, carried outside the home only once, and absolutely no wear, marks, or any issues whatsoever. The blade is dead centered. There is no lock stick and no blade play. Lockup is about 15% to 20%. It includes the slip/pouch only 'cause Remi doesn't do COAs.

Let's call the TV: $1k.

Trades:

I'm parting with it because my collection is mostly front flippers right now and in the time I've been waiting for this build to complete, I've acquired a Clark and a Jourget and some other stuff that makes this a little redundant. More interested in trading 1:1 or down than trading up.

Possible interests:

• QP Canyon
• Cerberus Aurelius
• maybe a cool Ragnahawk or Talon?
• I dunno, hit me up

🔴SOLD Excellent condition, factory edge. Only snails are from the stock clip contact(clip included). Carried a handful of times, 2nd owner.
Perfect lock up, perfect centering. Half disassembled once to install OEM beaded lanyard.

What’s included:
Box, papers, cloth, grease, locktite, tool, New small leather sheath, stock clip, clip insert, beaded lanyard, stock black lanyard.

What’s been done: Installed beaded lanyard, routine dusting/cleaning, renaissance wax on inlays.

🔴SOLD: $450

Will ship pirateship, insured rounded up to the closest hundred ($500).

Thanks for looking southpaws! Or righties too!

Google Drive link to all photos:
https://drive.google.com/drive/folders/1Ojp80Q3JD2mLNP1mWYmx9ObslHclm1VY

It's that time again party animals! Let's make some moves!

Timestamp and album and videos: https://imgur.com/a/rd6ni4l

Null knives voodoo doll black dunes/vanax steel + polished Zirc kit. Original owner purchased during the preorder. Has been carried and cut a few things but no visible wear and tear except maybe some finger smudges. Has been disassembled in order to install Zirc kit. Totally centered and locks up tight. Comes with original box + hardware. Unreal action and a great slicer. Totally drop shut.

SV $435

Mallery Designs H20, new release from Kickstarter. 20cv + CF. Love the design but just need the cash. Original owner, centered and locks up tight. Comes with OG box + pouch + Velcro patch.

$150 shipped

Take both for an even $500!

Kershaw Shoreline - Black Nylon scales. 8Cr13MoV steel. Assisted opener. Never cut, sharpened, disassembled, or carried. This was received in a blister pack. No box or paperwork.

SV: 25

Cold Steel CODE 4 (#58PSZ) - Silver/Gray aluminum scales. Spear point S35VN blade. Tri-Ad lock. Brand new, unopened, still in blister pack. Never cut, sharpened, disassembled, or carried. Package and paperwork included (obviously). I actually ordered one and they sent two. I’ve had this one sitting in the drawer waiting to sell. Now is the time. Snag it up!

SV: 60

Timestamp & photos: https://imgur.com/gallery/cold-steel-code-4-kershaw-shoreline-OLz0QdO

Timestamp

PM2 Salt DLC

• Price: $170.00
• Blade Steel: MagnaCut
• Sharpened: No
• Used to cut: No
• Carried: No
• Blade Condition: Factory hair popping sharp. I love fresh Spyderco edges!
• Number of Owners: 2
• Centering: Favors show side. Have not tinkered with it to fix it.
• Lockup: Solid. Very minor side-to-side so that it falls shut.
• Box and Docs: Yes
• Catch and release. No carry or cutting by the previous owner or me. I planned to mod this one, but I picked up both tanto versions in the recent drops, so I don't need this one.

Kunwu Pulsar Reverse Tux Matte DLC

• Price: $180
• Blade Steel: Elmax
• Sharpened: No
• Used to cut: No
• Carried: No
• Blade Condition: Factory and very sharp.
• Number of Owners: 2
• Centering: Yes
• Lockup: Solid
• Box and Docs: Yes, comes with all the goodies from the factory.
• Catch and release on this one as well. I've had it for a while, but it's always been kept in my Pelican. The action is great, feels nice in the hand, and the fit/finish is spot on, but I prefer frame locks in general.

Please let me know if you have any questions or would like additional pictures. Preferred payment: Zelle > PPFF, with no notes. CONUS Shipping Only. Will ship the next weekday after payment is received via USPS, fully insured through Pirateship. YOLO > Chats unless a deal has already been worked out and agreed to. I reserve the right to sell to whoever I choose. If you yolo, please be ready to pay within 30 minutes, or I'll move to the next interested party. If I don't respond within 30 minutes of your yolo (family time, sleeping, etc.), I will reach out and give the first in line a reasonable amount of time to respond. Please comment before chatting. I WILL NOT RESPOND UNLESS YOU COMMENT FIRST. Please know your local knife laws. ¯_(ツ)_/¯

Thanks for looking.

$425

Very cool knife, built to work for sure. Shark lock is fidgety af.

2nd or 3rd owner on this, actually wasn't in the original post.

MXG backspacer and Krein regrind. Super slicey. 204P steel.

I did not cut, I carried once. Centered, I think the original seller to me was over critical on his wear lol, I see nothing or any gap 🤷. Sellers post included.

More pictures available on request. I'll make it cheaper if you bundle All prices are OBO, yolo takes whatever you want

Shaman in CPM M4 275 $250 NO POCKET CLIP Has box and papers Second owner, factory edge, solid lockup, good centering

Maxamet PM2 #1 $210 $185 LNIB, opening is factory stiff Second owner, factory edge, solid lockup, good centering

Maxamet PM2 #2 $210 $175 LNIB, opening is broken in and drops shot Second owner, factory edge, solid lockup, good centering

Maxamet Manix 2 LW $200 $175 LNIB, opening and lock are factory stiff Second owner, factory edge, solid lockup, good centering

Yojumbo S30V $175 $150 NO POCKET CLIP NO ORIGINAL BOX Second owner, factory edge, solid lockup, good centering

Price: $250

General rules apply, YOLO trumps all PM’s no notes on payment, & no trades at this time please.

[SPECS]
Blade: DLC Coated S90V
Handle: Carbon Fiber w/ Dama. Pattern
Liners: Skeletionized Stainless Steel
Hardware: Blue Anodized Titanium
Clip: Blue Anodized Titanium
Misc.: OEM Scales & Hardware In Box

Second owner, first owner had carried & used a fair bit. I have resharpened the blade to a high polish & carried it a few times; only cut a couple receipts for a sharpness test. Knife has been disassembled for cleaning & modding with the current kit. All aftermarket parts were purchased from KnivesPlus. Handle scales were replaced with Carbon Fiber “Damascus Pattern”, hardware is AWT/KP blue anodized Titanium as well as a blue anodized Titanium deep carry clip from LynchNW. Centering is dead on, action is butter smooth, & lockup (about 35-40%) is rock solid. There’s some scratches on the blade, nothing egregious but visible nonetheless. The pivot & stop pin screws have some scratches & ano fade. Aside from that no other cosmetic or functional damages to note. Does come with original box, docs, & original scales, clip, & hardware.

Thanks for checking out the post, if you have any questions feel free to PM. I hope this knife finds a good home in your collection/pocket.