r/raspberry_pi • u/Kommipro • 15h ago

Show-and-Tell My Raspberry Pi 5 runs my smart home. But controlling its own case was surprisingly difficult.

Post image
23 Upvotes

I've been running Home Assistant Container on my Raspberry Pi 5 for a while now, along with a few other Docker services.

The Pi is inside a SunFounder Pironman 5 case, which has a fan, RGB lighting and an OLED display.

One thing that always bothered me was that I could control pretty much everything in my smart home through Home Assistant, except the case my Pi was sitting in. 😅

I looked into the Pironman's local REST API and started building a custom Home Assistant integration.

Initially, I just wanted to monitor the hardware and control the fan. Eventually, I added RGB lighting, OLED display controls and more system sensors.

Since I'm using Home Assistant Container, I also wanted it to work over the network without needing Home Assistant installed directly on the Pi.

I've since added support for the Pironman 5 Max and spent quite a bit of time fixing bugs, testing things and improving the integration.

A few days ago, it was accepted into the default HACS repository, so it can now be installed directly through HACS without adding a custom repository.

That was pretty cool, especially since I originally built it just to solve an annoyance with my own setup.

Here's the GitHub repo if anyone wants to have a look or try it:

https://github.com/ChristophKomenda/pironman5-homeassistant-container

I'd be interested to know if anyone else is running Home Assistant Container on a Raspberry Pi and how you're handling hardware monitoring or fan control.

5 comments

r/raspberry_pi • u/crime_of_heart • 11h ago

Show-and-Tell Building a Pi Zero W replacement for my car's dead Bluetooth module (CAN bus, A2DP, hands-free calls with the car's own mic)

22 Upvotes

The Bluetooth module of my 2011 Alfa Romeo Giulietta died, and it never did music anyway, only calls. A Pi Zero W now lives in the module's original case and does both. The factory radio stays and treats the Pi as the original part.

The Pi-specific parts, in case they help someone:

  • **CAN:** MCP2515 + TJA1050 board on SPI. The board needs its supply rails split, or MISO drives 5 V into a 3.3 V GPIO. One cut track and one wire.
  • **Audio:** a USB sound card soldered to the test pads under the Pi. Music uses A2DP; calls use HFP with bluez-alsa built with mSBC, so call audio is 16 kHz instead of 8. Calls work with the unit fully installed, but the other person still hears a slight echo and the Pi has no echo cancellation yet.
  • **One radio:** Wi-Fi and Bluetooth share it on the Zero W. With Wi-Fi up, the music lost a few hundred audio packets a minute. A small service turns Wi-Fi off while audio plays.
  • **Boot time:** the car checks its modules in the first three seconds after it wakes. On the measured cold start, the application reached the bus about 53 s after power-on, so the Pi uses a measured 0.63 W standby. The configured 72-hour halt and long-parking restart have not yet been tested in the car.
  • **Power:** the first buck converter dropped to 0 V out at 10 V in, so the Pi reset on every engine start. The Zero has no under-voltage detection, so `get_throttled` told me nothing.
  • **Wake:** CAN traffic wakes the Pi from standby. An optional GPIO3 ignition circuit was bench-tested to restart a halted Pi, but it is not part of the installed behavior proved in the car.

Full write-up with diagrams and measurements:

https://duzgun.org/blog/giulietta-blue-me/

The CAN side builds on fmntf's fiatcan project. Happy to answer questions

![img](7w10bkvf4wxh1)

2 comments

r/raspberry_pi • u/Creepy-Anteater347 • 2h ago

Show-and-Tell The_Groove.sh has been installed

Enable HLS to view with audio, or disable this notification

6 Upvotes
2 comments

r/raspberry_pi • u/FozzTexx • 8h ago

2026 Oct 26 Stickied -FAQ- & -HELPDESK- thread - Boot problems? Power supply problems? Display problems? Networking problems? Need ideas? Get help with these and other questions!

3 Upvotes

Welcome to the r/raspberry_pi Helpdesk and Frequently Asked Questions!

Link to last week's thread

Having a hard time searching for answers to your Raspberry Pi questions? Let the r/raspberry_pi community members search for answers for you!† Looking for help getting started with a project? Have a question that you need answered? Was it not answered last week? Did not get a satisfying answer? A question that you've only done basic research for? Maybe something you think everyone but you knows? Ask your question in the comments on this page, operators are standing by!

This helpdesk and idea thread is here so that the front page won't be filled with these same questions day in and day out:

  1. Q: What's a Raspberry Pi? What can I do with it? How powerful is it?
    A: Check out this great overview
  2. Q: Does anyone have any ideas for what I can do with my Pi?
    A: Sure, look right here!‡
  3. Q: My Pi is behaving strangely/crashing/freezing, giving low voltage warnings, ethernet/wifi stops working, USB devices don't behave correctly, what do I do?
    A: 99.999% of the time it's either a bad SD card or power problems. Use a USB power meter or measure the 5V on the GPIO pins with a multimeter while the Pi is busy (such as playing h265/x265 video) and/or get a new SD card 1 2 3. If the voltage is less than 5V your power supply and/or cabling is not adequate. When your Pi is doing lots of work it will draw more power, test with the stress and stressberry packages. Higher wattage power supplies achieve their rating by increasing voltage, but the Raspberry Pi operates strictly at 5V. Even if your power supply claims to provide sufficient amperage, it may be mislabeled or the cable you're using to connect the power supply to the Pi may have too much resistance. Phone chargers, designed primarily for charging batteries, may not maintain a constant wattage and their voltage may fluctuate, which can affect the Pi’s stability. You can use a USB load tester to test your power supply and cable. Some power supplies require negotiation to provide more than 500mA, which the Pi does not do. If you're plugging in USB devices try using a powered USB hub with its own power supply and plug your devices into the hub and plug the hub into the Pi.
  4. Q: I'm trying to setup a Pi Zero 2W and it is extremely slow and/or keeps crashing, is there a fix?
    A: Either you need to increase the swap size or check question #3 above.
  5. Q: Where can I buy a Raspberry Pi at a fair price? And which one should I get if I’m new? Should I get an x86 PC instead of a Pi?
    A: Check stock and pricing at https://rpilocator.com/ — it tracks official resellers so you don’t overpay.
    Every time the x86 PC vs. Pi question comes up the answer is always if you have to ask, get a PC. If you're sure want a Raspberry Pi but not sure which model:
    • If you don’t know, get a Pi 5.
    • If you can’t afford it, get a Pi 4.
    • If you need tiny, get a Zero 2W.
    • If you need lowest power, get the original Zero.
    • For RAM, always get the most you can afford; you can’t upgrade it later.
      That’s it. No secret chart, no hidden wisdom. Bigger number = more performance, higher cost, higher power draw. Also please see the Annual What to Buy Megathread
  6. Q: I just did a fresh install with the latest Raspberry Pi OS and I keep getting errors when trying to ssh in, what could be wrong?
    A: There are only 4 things that could be the problem:
    1. The ssh daemon isn't running
    2. You're trying to ssh to the wrong host
    3. You're specifying the wrong username
    4. You're typing in the wrong password
  7. Q: I'm trying to install packages with pip but I keep getting error: externally-managed-environment
    A: This is not a problem unique to the Raspberry Pi. The best practice is to use a Python venv, however if you're sure you know what you're doing there are two alternatives documented in this stack overflow answer:
    • --break-system-packages
    • sudo rm a specific file as detailed in the stack overflow answer
  8. Q: The only way to troubleshoot my problem is using a multimeter but I don't have one. What can I do?
    A: Get a basic multimeter, they are not expensive.
  9. Q: My Pi won't boot, how do I fix it?
    A: Step by step guide for boot problems
  10. Q: I want to watch Netflix/Hulu/Amazon/Vudu/Disney+ on a Pi but the tutorial I followed didn't work, does someone have a working tutorial?
    A: Use a Fire Stick/AppleTV/Roku. Pi tutorials used tricks that no longer work or are fake click bait.
  11. Q: What model of Raspberry Pi do I need so I can watch YouTube in a browser?
    A: No model of Raspberry Pi is capable of watching YouTube smoothly through a web browser, you need to use VLC.
  12. Q: I want to know how to do a thing, not have a blog/tutorial/video/teacher/book explain how to do a thing. Can someone explain to me how to do that thing?
    A: Uh... What?
  13. Q: Is it possible to use a single Raspberry Pi to do multiple things? Can a Raspberry Pi run Pi-hole and something else at the same time?
    A: YES. Pi-hole uses almost no resources. You can run Pi-hole at the same time on a Pi running Minecraft which is one of the biggest resource hogs. The Pi is capable of multitasking and can run more than one program and service at the same time. (Also known as "workload consolidation" by Intel people.) You're not going to damage your Pi by running too many things at once, so try running all your programs before worrying about needing more processing power or multiple Pis.
  14. Q: Why is transferring things to or from disks/SSDs/LAN/internet so slow?
    A: If you have a Pi 4 or 5 with SSD, please check this post on the Pi forums. Otherwise it's a networking problem and/or disk & filesystem problem, please go to r/HomeNetworking or r/LinuxQuestions.
  15. Q: The red and green LEDs are solid/off/blinking or the screen is just black or blank or saying no signal, what do I do?
    A: Start here
  16. Q: I'm trying to run x86 software on my Raspberry Pi but it doesn't work, how do I fix it?
    A: Get an x86 computer. A Raspberry Pi is ARM based, not x86.
  17. Q: How can I run a script at boot/cron or why isn't the script I'm trying to run at boot/cron working?
    A: You must correctly set the PATH and other environment variables directly in your script. Neither the boot system or cron sets up the environment. Making changes to environment variables in files in /etc will not help.
  18. Q: Can I use this screen that came from ____ ?
    A: No
  19. Q: If my Raspberry Pi is headless and I can’t figure out what’s wrong, do I need to plug in a monitor and keyboard?
    A: If you cannot diagnose the problem remotely, you must connect a monitor and keyboard. That is the only way to see boot output and local error messages, and without that information the problem cannot be diagnosed.
  20. Q: My Pi seems to be causing interference preventing the WiFi/Bluetooth from working
    A. Using USB 3 cables that are not properly shielded can cause interference and the Pi 4 can also cause interference when HDMI is used at high resolutions.
  21. Q: I'm trying to use the built-in composite video output that is available on the Pi 2/3/4 headphone jack, do I need a special cable?
    A. Make sure your cable is wired correctly and you are using the correct RCA plug. Composite video cables for mp3 players will not work, the common ground goes to the wrong pin. Camcorder cables will often work, but red and yellow will be swapped on the Raspberry Pi.
  22. Q: I'm running my Pi with no monitor connected, how can I use VNC?
    A: First, do you really need a remote GUI? Try using ssh instead. If you're sure you want to access the GUI remotely then ssh in, type vncserver -depth 24 -geometry 1920x1080 and see what port it prints such as :1, :2, etc. Now connect your client to that.
  23. Q: I want to do something that already has lots of tutorials. Do I need a Raspberry-Pi-specific guide?
    A: Usually no.
    • Raspberry Pi (Linux computer): Use any standard Linux tutorial. A Raspberry Pi runs a normal Linux OS, not a special cut-down version. See Question #1.
    • Raspberry Pi Pico (microcontroller): Use Arduino tutorials. The Pico works with the Arduino IDE and can be used the same way as other Arduino-class boards.
  24. Q: Which Operating System (OS) should I install?
    A: If you aren’t sure, install Raspberry Pi OS. It’s the officially supported OS, it has the best documentation, the widest community support, and it’s what most guides and troubleshooting help assume you’re using.
  25. Q: How can I power my Raspberry Pi from a battery?
    A: All Raspberry Pi models run at 5 V. To choose a battery, first add up the maximum current of your Pi plus everything you attach to it (USB devices, screens, HATs, etc.). Then multiply that current by the number of hours you want it to run to get the required battery capacity in mAh. If you can’t find listed current values, use a USB power meter to measure the actual draw over 12–48 hours. Every battery question comes down to this simple math: the model, brand, or special setup doesn’t change the calculation.

Before posting your question think about if it's really about the Raspberry Pi or not. If you were using a Raspberry Pi to display recipes, do you really think r/raspberry_pi is the place to ask for cooking help? There may be better places to ask your question, such as:

Asking in a forum more specific to your question will likely get better answers!

Wondering which flair to use on your post? See the Flair Guide

† See the /r/raspberry_pi rules. While /r/raspberry_pi should not be considered your personal search engine, some exceptions will be made in this help thread.
‡ If the link doesn't work it's because you're using a broken buggy mobile client. Please contact the developer of your mobile client and let them know they should fix their bug. In the meantime use a web browser in desktop mode instead.

0 comments

r/raspberry_pi • u/Gamerfrom61 • 16h ago

Topic Debate Yesterdays power cut taught me a few things

3 Upvotes

No not to buy a UPS - I have one 😂 Though only a small one it runs the load for around an hour and talks via USB to a Pi Zero to control things. Visit https://networkupstools.org if you are not using this - way better than some of the 'free' manufactures software (inc DSM on my Synology box).

Though most kit shut down and restarted fine, I had forgotten that a couple of smart switches come back in the off position and one of these was on the DNS server (Pi 4B 2GB running unbound) so a couple of services needed restarting to come up cleanly.

UPS control (Pi Zero with Ethernet HAT) and NUT ran fine (as per testing) and the card survived me manually turning the UPS off after 45 minutes of power outage.

WiFi AP came up before the router and falls back to a lousy flaky WiFi connection and not the faster SOLID Ethernet link (stupid or what) - I think it times out checking the Ethernet port and then just looks for the WiFi to come up from any other device to create a mesh.

Bits learnt / re-enforced:

  • Pi boxes are so handy on a UPS compared to the bigger X86 boxes / NAS. Only the N95 and N150 boxes here matches them for power consumption and the UPS run time is way longer now I have moved a fair number of services to the Pi boards in the rack.
  • Practise a full power restore rather than dry running it. My shutdown was OK but coming back was a bit of a pain
  • Finish the family documentation - the notes I have are not up to date and my wife / son would be stuck without me. NO EXCUSES on this ❤️
  • My ISP does not have any long term power backup - they dropped before I had to power off the NTU... Real issue as our mobile signal here rates "pathetic" on a good day and we rely on WiFi calling.

Things to ponder over:

  1. Changing the NUT server to a read only overlay rather than just risking the manual power off and relying on a 'hot' backup card taped to the box!
  2. May be add a soft shutdown button to the NUT server rather than just killing power from the UPS.
  3. Check the boot sequence of the Pi boards - the USB should be first and the SD card in the built-in reader should be up to date. Big thanks to Jeff Geerling for keeping https://github.com/geerlingguy/rpi-clone/ running.
  4. Think about adding a 'Smart switch' control Pi (with a small screen / buttons) to control the rack power sockets - I was lucky this time but if I need to manually control the switches a 'phone may not have WiFi and they are a pain to reach in the cabinet.
  5. Making the NUT server control the power on sequence for all devices not just the rack
  6. Add a DNS server to the UPS Pi Zero (or get another Pi Zero set up) to act as a backup to the 'lan support' Pi (this runs DNS, some days DHCP, Reverse Proxy, MQTT server, Cloudflare tunnel and lan monitor - not bad for a 2GB Pi).
  7. RSYNC (running in a tmux session) is a life saver - I was copying 3.4TB of files between boxes and the systems shut down after 3.8TB. Rsync just carried on from the last successful file once I restarted it and though tmux looses the bash history in this situation the command was easy to reconstruct - tmux is so handy for ssh when you are running long tasks or have a host that sleeps and easy to install on the Pi with apt). 2 minutes to learn the very basic use.
  8. No WiFi is a pain with smart sockets / switches - possibly use a Pi as a backup AP or look at power line ethernet for the access points. Maybe limit devices that can connect (with static IP addresses matching the main router allocation) and swap over once the main system are up??? Currently I need WiFi to be able to turn the WiFi access point on 🤔
  9. Review the start up of Docker containers rather than the default 'just restart' - make sure a DNS server is up first and lan connection is available (esp on WiFi)...
  10. Decide if I close the last big i5 power eater down and move the jobs to a couple of Pi boards / N95 boxes. Fortunately I had just moved Jellyfin to my NAS so that box was not eating UPS power.
  11. Decide what is handling DHCP . Currently it is my router but it maybe better if I take this over once TP-Link have investigated / fixed the curious errors we are seeing on the web console.
1 comment

r/raspberry_pi • u/willyb99 • 18h ago

Troubleshooting Issues running a command

0 Upvotes

Hello! I am trying to run Openvpn on my pi5. I have the openvpn command calling a .conf file with my user/pass. I am getting an "AUTH_FAILED" error. I am logged in as myself (pi has been renamed to my username) the permissions on the user/pass .conf file are "-rw-r--r-- 1 root root" Could this be the problem? I did see an error a few days ago about accessing this .conf file with the user/pass. How can I fix this? I can't understand how whomever is logged in can't access that user/pass file. Any help would be greatly appreciated! Thank you!

3 comments