Hi and good evening to all.

I have installed Armory Crate just for fun but unfortunately, my pc is in fast startup boot every time I turn on the PC. I also cannot access my BIOS when startup. So, I the uninstalled Armory Crate.

When uninstall the Armory crate, my RGB lights are all lights off except for my ram sticks. So, I installed it back and the RGB lights turns on like before but I'm having the same startup problem.

I have done the some of these steps:

1. Reinstall and uninstall Armory crate using the asus tool from the asus's website.
   
2. Aura setting in BIOS also have been turned on.
   
3. Full power cycle also has been done.
   
4. Replug the RGB headers.
   
5. My pc doesn't support the windows dynamic lighting.

My PC specs are:

AMD Ryzen 7 5700x
Asus B450-F Gaming
Kingston HyperX (8gb x2)
Cooler Master ML240L V1 240mm AIO

Please help. Thanks

I know is low on ram and storage. But more for multimedia and light work to replace an ipad that feels like a giant iphone. Not sure if this was a good deal or should I look for something else?

Hello. I’ve been using my zenbook 13 (ux331) for almost 9 years. I haven’t had any problems with it until last week when the screen started flickering.

Last week this happened once and lasted for about 10-20 mins. And today it is happening again. The external monitor is fine.

I know it’s old and it’s time to buy a new one. But I like this lightweight laptop. Is anyone still using this zenbook 13? Does your zenbook work well? If anyone has experienced similar issues and managed to fix it, I’d love to hear how you did it.

I’m a little sad. This zenbook has always been with me. I’m kind of attached to this laptop.

Sorry for my awkward English. Thanks in advance.

Recently bought a G814FP/5070(upgraded from a G713IM) and immediately noticed that it struggles to handle my USB Peripherals. Audio cuts out, mouse freezes whenever I try to charge my 8 vive trackers. Whenever I try to get on VR, I am constantly losing tracking with my headset and trackers. Gray screens and the sound of devices being turned off.

Tried updating my BIOS, any windows or Asus updates, had the power management changed to high performance, disabled USB selective suspend, yet nothing has seemed to work.

I'm currently at my wit's end.

What if your ASUS ROG Ally could do more than just one screen?

We’re the official Wisecoco team, and this clip-on monitor brings a new dimension to the ROG Ally gaming experience with a dual-screen setup. From racing games to everyday gaming, it’s another way to explore what your ROG Ally can do.

Would you try a dual-screen setup on your ROG Ally? 👀

Hi I have asus tuf gaming b850 plus wifi mobo. Wondering if anyone had any problems with this Version 1804 bios update. Currently runnin release from July 16?? With no issues but thinking should I flash it? Cpu 9850x3d and corsair vengeance 6000mhz ddr5

I replaced the screen of my ASUS TUF Dash F15 (FX517ZM) with an InfoVision M156NWF9 R4 panel (15.6" FHD 144 Hz, EDID ID IVO0621) and Armoury Crate stopped recognizing it. GameVisual showed "may not be supported", and Panel Power Saver (Devices > System Settings) could be selected but did nothing: the refresh rate never dropped to 60 Hz on battery.

**Why it happens**

ASUS identifies the panel by its EDID (manufacturer + product code). Mine was not in ASUS's lists, so:

1. ASUS Smart Display Control ignored it. It only switches Hz for panels listed in C:\ProgramData\ASUS\ASUS Smart Display Control\FRQ_Config.txt.

2. GameVisual looked for a colour profile named FX517ZM_8086_CF260621.icm, which did not exist. The log (Armoury Crate Diagnosis > AppLog) said "ICM Exist: 0 ... ICM File need re-download".

**How I fixed it**

1. Panel Power Saver: I added this line at the end of FRQ_Config.txt (open it with Notepad as administrator, format is manufacturer,product,maxHz,minHz):

CF26,0621,144,60

2. GameVisual: I copied an existing profile from C:\ProgramData\ASUS\GameVisual (for example FX517ZM_8086_E5090A07.icm) and named the copy FX517ZM_8086_CF260621.icm (and FX517ZM_10DE_CF260621.icm). I put the copies in C:\ProgramData\ASUS\GameVisual, its Backup subfolder, and C:\Windows\System32\spool\drivers\color\AsusICM.

3. Restart. Now GameVisual opens and the refresh rate switches between 144 Hz (charger) and 60 Hz (battery).

For another panel, CF26 and 0621 will be different. You can read them from the EDID, or let the script do it.

**Script that does all of this**

I wrapped it in a PowerShell script that reads your panel's EDID, adds it to the list and creates the profile, with a backup and an undo option. It has a dry-run mode that only shows what it would do:

https://github.com/DiegoCando1/Asus-auto-refresh-game-visual-panel-fix

Caveats: tested on one laptop only.

Basically the laptop won't turn on when I press the power button once , although I managed to turn it on by pressing it for around 50-60 seconds although I have to try three times and the first two times it just blinks white on the indicator and promptly stops after I lift my hand from the power button...I use a asus tuf A15 FA566NCR

Hi!

My Asus Zenbook needs a new motherboard, apparently the tech guy said there was some corrosion found on it from a spill or something (very plausible) laptop is 2 years old.

He has quoted me AUD$700 for a replacement.

Is that fair or a bit steep? I know a lot about a lot of things, computers is not one of them. Any info you could give me would be great.

Im not a gamer, im a writer, mum etc so it doesnt need a whole lot of power etc.

Or do i just buy a new laptop??

Thanks xxx

hello, i have an asus vivobook 15 x515ja/a516ja laptop. a few weeks ago my laptop got bricked, it turns on but to no display output at all (screen doesnt even turn on) and yes it was bricked.

ive bought a CH341A programmer USB which acme with an SOIC-8 test clip and i have successfully unbricked my laptop. however, my keyboard and touchpad no longer work at all, this is because i downloaded a generic bios .bin file with the wrong revision

• my bios chip is a winbond 25q128jv...
• my mobo is an X415JA REV 2.3 from ASUS and i would need a .bin file for it

do any of you guys know a website to download one for free or do you guys have a free .bin file for my x415ja rev 2.3 bios. please reply if you do!!!!

Asus UX434F laptop, new December 2020. I was just working on Word on it, fan running, plugged in to power and there's a pop and it turns off - no warning. Every few seconds there's a quiet "tick tick" noise. Even unplugged it's making that "tick tick" noise.

I've opened the bottom and unplugged the battery for safety after AI recommended not attempting a power on.

I did replace the battery two years ago myself.

Hi, I am looking for an optimal OS, possibly open source ones, that would allow me use Blender (3D modelling and editing) routines.

2023 ASUS TUF-17 (FX706 HF).

I am accustomed with debian based OSes, and installed Linux hundreds of times , until a decade ago (SATA HDD and MBR partitions days). I have no clue how it goes between current OSes and nVidia GPUs , GPT partitions etc.

Any OS recommendations that worked, please?

Links to external articles too are also much welcome.

Ive a Huion Kamwas 20 ( external monitor with stylus input) which I wish to use for modelling.

Que puis-je faire ?

I’ve got a PG32UCDP monitor (fantastic) and when I put my new Valve Steam Frame VR headset on, I noticed that a bright flashing came from the monitor…

Anyone know what this is? Infrared? I get similarly flashed when my phone tries Face ID.

Edit: I checked my monitor settings and my proximity sensor is set to off. Idk why it’s still flashing.

Whenever I download the bios update and try to use ai suite 3 to update it says I’ve got the wrong one even though im pretty sure there’s only one b550 plus ac-hes

Hi guys,
I left my laptop switched off for 3 days and now it won't boot.
When I press the power button the keyboard lights up, fans spin but there's nothing on the screen and the signature ROG boot-up sound is missing.

I did try some standard self diagnostic:
* Checked both Ram modules (they're fine, checked them on a Vivobook and both works completely fine)
* The Secondary ssd is fine, it gets detected on the other system in boot menu.
* The primary SSD that came pre installed in the laptop is not getting detected, i guess its dead.
* When I connect an external monitor via HDMI the Boot-up sound is there but the screen is still blank.
* When I connect external monitor via USB C to HDMI or Display port there is no boot up sound or display.

Has anyone faced the same issue or got any idea how to deal with it. The guys at the service center are unable to help, they're clueless about it.

When I use VPN director to direct a single IP to the VPN it works great.

When I use a guest network, it also works great.

When I try to direct the guest network to the VPN, speeds slow to a crawl, but oddly with wireguard it only slows download speed and not upload speeds but with openvpn both upload and download speeds are capped at around 170mbit (normally get around 400-700mbit up and down when on 5GHz).

It seems be an issue with the VPN + an isolated guest subnet, so either I can use a guest subnet or a VPN but not both. I tried it buy both setting up a ‘VPN Network’ and by using a regular guest network and using VPN director and a rule to direct all IPs (and I tried just directing a single IP) in the new subnet but both have the same issue.

In short:

Guest network: 400-800Mbit up/down

VPN: 400-800Mbit up/down

Guest Network and VPN (OpenVPN): 170-180Mbit up/down

Guest Network and VPN (Wireguard): 400+Mbit up, 170Mbit down

Any ideas? Running a BE98-PRO and Merlin 3006.102.9

Hi!

For the past month, my "9" "o" "l" "." keys are not working properly! They either don't output anything at all or sometimes when they start working they input multiple of the keys at once, so like oooooo ..... llll 99999.

Is this hardware or software related?

I am looking for the review of this specific model at Best Buy. But it seems never been reviewed anywhere. Any idea?

https://www.bestbuy.com/product/asus-proart-p16-16-3k-oled-touchscreen-laptop-amd-ryzen-ai-9-465-2026-nvidia-rtx-5060-32gb-memory-512gb-storage-nano-black/JJGHGSYY54/sku/6675518

Specs:
ASUS ProArt P16 (2026) – Specs
CPU: AMD Ryzen AI 9 465 (10 cores)
GPU: NVIDIA GeForce RTX 5060 Laptop GPU
RAM: 32GB LPDDR5X (soldered)
Storage: 512GB PCIe 4.0 SSD (upgradeable)
Display: 16” 3K OLED touchscreen (2880 × 1800)
Refresh Rate: 120Hz
Color Gamut: 100% DCI-P3
Battery: 90Wh